Motorola SB5100 Series - Rear Panel

2-4 Overview
SURFboard Cable Modem Installation Manual
Rear Panel
The SURFboard cable modem rear panel provides the cabling connectors, status LEDs, and
power plug as illustrated in Figure 2-3:
Figure 2-3
Rear-panel connections and LEDs
ETHERNET
USB
CABLE
+12VDC
USB C PE MAC ID:A BDCEF012 345 S/N : PPPPMMY JJJSSSSSCAA BBCCCC HFC MAC ID: ABCDEF012345 CU STOMER S/N: BCDFGHJK LMNP
1
2
3
4
Table 2-2 describes the SURFboard cable modem rear-panel connections and LEDs:
Table 2-2
Rear-panel connections and LEDs
Key Item Description
1
ETHERNET The Ethernet port provides a connection to Ethernet equipped computers using a cable
terminated with an RJ-45 connector.
2
USB This port provides a direct connection to USB equipped computers.
3
CABLE This port provides a connection to the coaxial cable outlet.
4
+12VDC This connector provides power to the cable modem.