Motorola SB5100 Series - Dhcp; Tftp

B-10 Event Log Messages
SURFboard Cable Modem Installation Manual
Code Event Log Messages Level Cable Modem Actions
B555.0
First DRIVER_TEK_INVALID Msg 7 (Info) Information purpose to indicate that
CM just receives a first TEK Invalid
Message from the driver due to CRC
failed.
B555.1
Just received another TEK_INVALID Msg 7 (Info) Information purpose to indicate that
CM received another TEK Invalid
message from the driver due to CRC
failed
B556.0
BLP – Authorization Wait Timeout out of
range
4 (Error) Log it
B556.1
BLP – Reauthorization Wait Timeout out
of range
4 (Error) Log it
B556.2
BLP – Operational Wait Timeout out of
range
4 (Error) Log it
B556.3
BLP – Rekey Wait Timeout out of range 4 (Error) Log it
B556.4
BLP – TEK Grace Timeout out of range 4 (Error) Log it
B556.5
BLP – Authorization Reject Wait Timeout
out of range
4 (Error) Log it
B556.6
BLP – Authorization Grace Timeout out of
range
4 (Error) Log it
DHCP / TFTP
Code Event Log Messages Level Cable Modem Actions
D500.0
Error in initializing DHCP Client 4 (Error)
D501.0
TFTP - Unable to allocate spaces for
Modem Capabilities data.
4 (Error) Set value to 0. Possibly reset the
board
D501.1
TFTP, Unable to allocate space for
software upgrade filename, CONTINUE
4 (Error) Set to NULL.
D501.2
TFTP, Unable to allocate spaces for Class
of Service, CONTINUE
4 (Error) Set to NULL.
D501.3
TFTP, Unable to allocate spaces for
SNMP Access Ctrl Obj, CONTINUE
4 (Error) Set to NULL.
D501.4
TFTP, Unable to allocate space for SNMP
Access Ctrl, CONTINUE
4 (Error) Set to NULL.
D501.5
TFTP, Unable to allocate spaces for
SNMP MIB Obj, CONTINUE
4 (Error) Set to NULL.
D501.6
TFTP, Unable to allocate spaces for
whole buffer
4 (Error) Set to NULL. The board will reset
D501.7
TFTP, Unable to allocate spaces for
Vendor Spec Data, CONTINUE
4 (Error) Set to NULL
D501.8
TFTP, Unable to allocate spaces for
vendor spec
4 (Error) Set to NULL