Installation and Operation 3-9
SURFboard Cable Modem Installation Manual
After all the necessary files are loaded, the window below is displayed confirming a
successful installation:
12 Click Finish. The window below is displayed:
13 Click Yes to restart your computer.
When you have successfully finished setting up the USB driver, you can continue with
“Configuring for TCP/IP in Windows 95, Windows 98, or Windows Me,” on page 3-18
If you have difficulties setting up the USB driver, perform the procedure for “Removing the USB
Driver from Windows 98 or Windows Me” on page 3-33, and then repeat this procedure.
To Next Page
Loading...
