EasyManua.ls Logo

Motorola SB5100 Series - Page 80

Motorola SB5100 Series
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B-8 Event Log Messages
SURFboard Cable Modem Installation Manual
Code Event Log Messages Level Cable Modem Actions
B504.2
Invalid HMAC Digest type [type] from Key
Reply Msg
4 (Error) Ignore it.
B504.3
Invalid Msg type [type] from Key Reject or
TEK Inv
4 (Error) Ignore it. Continue parsing next bytes
B504.4
Invalid SID [sid] from Key Reject or TEK
Inv
4 (Error) Discard the msg.
B505.0
BC3220 driver supports up to [nsid] Sids
and CMTS sent [nsids] Sids
5 (Warn) Set up to nsids(4) BC3220 supports
B506.0
Unmatched Identifier when received Auth
Reject Msg, ReqId = [reqid], Rec Id =
[recid]
2 (Alert) Unsolicited ID. Continue parsing next
bytes
B507.0
Received BLP MAC code type [Type] from
CMTS
7 (Info) For information purposes.
B507.1
Received Invalid BLP MAC code type
[type] from CMTS
7 (Info) Continue parsing next bytes
B508.0
Received BLP Internal Msg [Msg] 7 (Info) For information purposes.
B509.0
Authentication HMAC digest Failed.
Invalid Packet
4 (Error) Ignore it. CMTS send 0 HMAC Digest
value.
B510.0
Driver has forwarded INVALID TEK Sid. 5 (Warn) Discard the message
B510.1
SNMP forwarded INVALID Sid %d.
Unable to enable it
5 (Warn) Discard the message
B510.2
SNMP forwarded INVALID Sid %d or it's
already disabled
5 (Warn) Discard the message
B511.0
KEK bad state on HandleTimer() 2 (Alert) Discard the message
B511.1
KEK bad state on HandleStartup() 2 (Alert) Discard the message
B511.2
KEK bad state [state] on HandleAuthOk() 2 (Alert) Discard the message
B511.3
KEK bad state on HandleAuthReject() 2 (Alert) Discard the message
B511.4
KEK bad state on HandleAuthInvalid() 2 (Alert) Discard the message
B511.5
KEK bad state on ForceReauth() 2 (Alert) Discard the message
B512.0
Author Reject error code [error code] 4 (Error) Report error code to SNMP event log
B513.0
Error writing BLP data to MAC pipe 4 (Error) No action taken
B514.0
Driver allows [NumSid] Sids, CMTS
provided [NumSid] Sids
5 (Warn) Set to nSids in Driver
B515.0
Throw away this Sid [NumSid] 5 (Warn) No action taken
B516.0
TEK bad state on HandleTimer() 2 (Alert) Discard the message
B516.1
TEK bad state on HandleStartup() 2 (Alert) Discard the message
B516.2
TEK bad state on HandleStop() 2 (Alert) Discard the message
B516.3
TEK bad state on HandleAuthPending() 2 (Alert) Discard the message
B516.4
TEK bad state on HandleAuthComplete() 2 (Alert) Discard the message
B516.5
TEK bad state on HandleTekInvalid() 2 (Alert) Discard the message

Table of Contents

Other manuals for Motorola SB5100 Series

Related product manuals