B-12 Event Log Messages
SURFboard Cable Modem Installation Manual
Code Event Log Messages Level Cable Modem Actions
D518.0
Unable to write
DHCP_LEASE_RENEWAL_ABOUT_TO_
FAIL to pipe
1 (Emerg) Continue
D519.0
DHCP Client shutting down 7 (Info) Continue
D520.0
DHCP Client unable to bind HFC interface 1 (Emerg) Retry 2 more times
D521.0
DHCP Lease Renewal Failure 5 (Warn) Renew Lease function fails
D522.0
DHCP Lease Expired 1 (Emerg) Logged when event occurs
D523.0
DHCP Rebinding Timer Event 5 (Warn) Logged if the 87% point is reached
in the lease
D530.0
DHCP - Invalid IP Address 4 (Error) Logged if the Address is 0 or
FFFFFFFF
return NULL pointer to SC
D530.1
DHCP - Invalid Subnet Mask 4 (Error) Logged if the Address is 0 or
FFFFFFFF
return NULL pointer to SC
D530.2
DHCP - Invalid TFTP Server IP Address 4 (Error) Logged if the Address is 0 or
FFFFFFFF
return NULL pointer to SC
D530.3
DHCP - Invalid TFTP Boot File 4 (Error) Logged if the Boot File has a strlen
of 0
return NULL pointer to SC
D530.4
DHCP - Invalid Security IP Address 4 (Error) Logged if the Address is 0 or
FFFFFFFF
return NULL pointer to SC
D530.5
DHCP - Invalid Time Server IP Address 4 (Error) Logged if the Address is 0 or
FFFFFFFF
return NULL pointer to SC
D530.6
DHCP - Invalid Time Offset 4 (Error) Logged if timeoffset = 0
return NULL pointer to SC
D531.0
Class of Service is not in TFTP Config 7 (Info) No action taken
D532.0
Missing End Data Marker, rejecting TFTP
Config file.
4 (Error) Fail TFTP. Retry twice. If still failed,
reboot the board and start scanning
next frequency in the plan
D533.0
Net Access Ctrl Data out of range 4 (Error) Keep reading the next bytes of
TFTP config. If Reg-Response
returns OK, reboot the CM to notify
the CMTS range error
D534.0
Missing Net Access Ctrl Object, rejecting
TFTP Config file.
4 (Error) Fail TFTP. Retry twice. If still failed,
reboot the board and start scanning
next frequency in the plan
D536.0
Invalid filename [filename] 4 (Error) Can’t retrieve the config file, retry a
few times.
D537.0
Class-of-Service Privacy Enable out of
range
4 (Error) Log it and continue reading next
bytes of Config file.