20 January 08, 2002 6881039B25
Disassembly
Removing and Replacing the Rear Housing Cover
1. Remove the battery cover, battery, and SIM as described in the procedures.
2. Using the Torx driver and T-6 bit, remove the 2 screws shown in Figure 7. Set
the screws aside for reuse.
3. Slide the rear housing cover away from the unit and over the antenna until
clear of the phone as shown in Figure 7.
4. To replace, align the rear housing cover with the antenna and slide the cover
over the antenna and onto the top of the phone.
5. Insert and tighten the 2 screws. Do not overtighten.
6. Replace the SIM, battery, and battery cover as described in the procedures.
011100-o
Figure 7. Removing the rear housing cover
REAR HOUSING COVER
ANTENNA
SCREW
SCREW
To Next Page
Loading...
