24 January 08, 2002 6881039B25
Disassembly
Removing and Replacing the Daughter PC Board
1. Remove the battery cover, battery, SIM, rear housing cover, rear transceiver
housing, and transceiver board as described in the procedures.
2. Using the disassembly tool, gently lift the daughter PC board out of its socket
on the transceiver board as shown in Figure 11.
3. To replace, align the daughter PC board socket with its receptacle on the
transceiver board.
4. Gently press the daughter PC board into it’s socket on the transceiver board.
5. Replace the transceiver board, rear transceiver housing, rear housing cover,
SIM, battery, and battery cover as described in the procedures.
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
011565-o
Figure 11. Removing the Daughter PC board
DISSASSEMBLY TOOL
DAUGHTER PC BOARD
TRANCEIVER BOARD
To Next Page
Loading...
