MOTU micro express - Page 100

CLOCKWORKS FOR MAC OS 9
100
Setting up the foot switch output data
If you choose “Foot Switch” from the “Pedal type” pop-up
menu, the window displays the data for the foot switch as
shown in Figure 6-44 on page 97.
The data sequence list lets you build a series of MIDI data
events. Here is a summary of what you can do:
To do this Do this
To add a MIDI event that you want
sent when you press the pedal down
(on)
Press on the arrow on the left-hand
side of the Pedal On column.
To add a MIDI event that you want
sent when you release the pedal
(off)
Press on the arrow on the left-hand
side of the Pedal Off column.
To add another MIDI event to
either column
Press on the arrow on the left-hand
side at the bottom of the list.
To edit the settings of an event Double-click the setting you wish to
change.
To add a new event that will be
grouped with the event above it
Press on a arrow anywhere in the
group where the event should be
inserted. The event is inserted
where the arrow points.
To delete an event Click the event to select it and press
the delete key.
To delete an entire row or group Click the square icon to the left of
the row to select it and press the
delete key.
To add a “panic” hit Press on a triangle and choose the
PANIC item.