Need help?Do you have a question about the Movacolor MC18-Micro and is the answer not in the manual?
General| Brand | Movacolor |
|---|---|
| Model | MC18-Micro |
| Category | Measuring Instruments |
| Language | English |
Explains key symbols and defines terms like Operator and Qualified Technician.
Covers transport, receipt, and legal disclaimers for the product and manual.
Essential safety precautions for operating and maintaining the dosing unit.
Details European regulations, standards, and operating environment limits.
Diagram and identification of the main components of the MC18-Micro dosing unit.
Steps for physically mounting the unit to the production machine, including angles and leveling.
Controller connections, mains voltage, and types of input signals for operation.
Attaching the hopper loader lid and connecting compressed air to the solenoid valve.
Guidance on attaching and securing the flexible hose for material transfer.
Advice on setting air flow regulators for optimal material transfer and energy conservation.
Instructions for adjusting the sensitivity of the sensor on the hopper loader.
Details the LED indicators and sensitivity adjustment mechanism for capacitive sensors.
Overview of the MC18-Micro controller's buttons, LEDs, and display functions.
Basic operational guidelines, acknowledging changes, and function activation rules.
Explains initial unit startup, motor type selection, and configuration modes.
Step-by-step guide for changing unit configurations and understanding timer/relay modes.
How to use the tacho function for automatic dosing rate adjustment based on extruder speed.
Procedure for calibrating the MCMicro by determining RPM vs. material output.
Introduction to Movacolor Ejector (ME) system for dry material handling.
Explanation of the ME system's material blowing process and dust filter.
Details on general operation, sensor input, and output signals for the hopper loader.
Configuration of fill time (FILt) and fill alarm (FILA) for the ME hopper loader.
Instructions on how to lock and unlock the unit's keyboard.
How alarms are indicated (LED, beeper, external output) and how to cancel them.
Details on filling alarm for low material and motor connection failure (ErrO).
A table detailing problems, causes, and solutions for material flow and loader issues.
To Next Page
