Movacolor MC18-Micro - Maintenance Recommendations

18
MC18-Micro manual
9 Maintenance
To keep the MC18-Micro functioning correctly, it is advised to perform regular maintenance.
Always switch off the control cabinet and disconnect the mains power plug from electrical power
before performing maintenance.
Always disconnect the main compressed air connection before performing maintenance.
Weekly
 Clean the dosing auger for proper operation;
 Check dosing tool auger for wear out;
 Check the dosing cylinder bearing for smooth rotating;
 Clean the dust filter of the ME loader system. This can be done by taking out the filter and clean it with
compressed air.
Monthly
 Check the motor seal for abnormal wear out;
 Replace the filter of the ME system.