Rev 7 12 (EN)
and the type of fastening. Therefore, any objects you wish to protect within the
boundary, such as a garden pond, trees, furniture or flower beds, must be
fenced out with boundary wire. The wire must form one complete circuit loop.
4.3 NAVIGATION INSIDE CORRIDORS.
If you have a corridor inside your lawn, your robot will be able to work on it if it is at least
1.2 meters wide (60 cm between the boundary wires) and max. 8 meters long.
4.4 HELIX CUTTING MODE.
If the robotic mower contacted the boundary wire over 5 times, and walked over 1 meter
after the last time, it will go into the helix cut for 3 circles. This helix cutting function
improves the mowing result in the centre area of rather big lawns.
4.5 CUTTING HEIGHT ADJUSTMENT
The robotic mower has continuous cutting height settings between 20 mm and 60 mm.
Before first use, please cut the grass down to max. 60 mm with a normal lawn mower or
a grass trimmer.
Do not attempt to raise or lower the cut height during cutting.