Rev 7 25 (EN)
6.1 CONTROL PANEL
The mower has already been programmed in the factory to a set of standard settings
but
these can be changed as you want. Even though factory settings will suit the majority
of gardens, it’ll be worthwhile to familiarize yourself with the available options.
After powering on the robot, it will be locked with a factory-set PIN code “1234”. Press
the numbers, then the robot will be unlocked. The main operation menu will be displayed.
Key options
Cursor up/ back key: On each keystroke, the cursor moves upwards or left
.
Cursor down/ forward key: On each keystroke, the cursor moves downwards
or right
.
Return key: On each keystroke, the cursor returns to the previous screen or
the settings are cancelled
.
OK key: Confirm settings.
Home key: Send the
robotic mower to the charging station (to be followed by
“OK” key).
Start key: Press the Start key and close the LCD cover, the
robotic mower will
start the working cycle.
Power Key: Ensure the status of main power switch on the back
underside is “ON”. Then this power key starts or shuts down the mower.
-- -- -- --
08-59-21 mower
To Next Page
Loading...
Need help?
General
