Mowox RM 800 Li BT User Manual

Rev 7 31 (EN)
• Step 6: On the pop-up message "Save it?", hit the OK key if you want to keep the
changes. Or, press to discard your changes.
Boundary cut
Your robot follows the boundary wire back to the charging station.
You can decide if it will have its mowing blades turned on. That will make the boundary well
mown.
The factory setting is “
No” , meaning the mower does not cut the grass on its way along the
boundary wire.
• Step 1: Move the cursor to the general setting , push .
• Step 2: Move the cursor to “Boundary cut” and push .
• Step 3: Use or to move the cursor to “No” or “Yes”. Then press .
• Step 4: On the pop-up message "Save it?", press if you want to keep the changes. If
you don’t want to save the changes, press to return to the previous menu.
6.5 CUTTING AND HEADING HOME
Push the “Start” key and close the LCD cover to let the robot mower start to work.
Set Work Time
Day Start Hours
Mon 02:00 22.0h
Tue 02:00 22.0h
Wed 02:00 22.0h
Thu 02:00 22.0h
Fri 02:00 22.0h
Sat 02:00 22.0h
Set Work Time
Day Start Hours
Mon 02:00 22.0h
Tue 02:00 22.0h
Wed 02:00 22.0h
Thu 02:00 22.0h
Fri 02:00 22.0h
Sat 02:00 22.0h
Boundary Cut
No
■Yes
Save it?
2018-08-25 Robot
08-59-21 Mower
Bat
Set Work Time
■Boundary Cut
WIFI Setting

Mowox RM 800 Li BT Specifications

General

Brand	Mowox
Model	RM 800 Li BT
Category	Lawn Mower
Language	English