Rev 7 39 (EN)
BATTERIES.
8. TROUBLESHOOTING
8.1 TROUBLESHOOTING OF THE CHARGING STATION
LED
description
solution
off no power Check power supply.
constant
green light
ready for mowing (Battery fully
charged, boundary wire OK)
correct connection
flashing
green
boundary cut off or connected
wrongly
Change the two wire ends and
check if the boundary wire has a
break somewhere.
red battery on charging
Await full charge or set “Start” –
“OK”.
8.2 TROUBLESHOOTING OF THE ROBOTIC MOWER
the LCD
to start
closed, the Robotic
mower will not start to
work.
doesn’t start
from the
station on
your
command
voltage.
Press OK to
go on.
The robot is set to fully
charge before leaving
out of the station.
Manual start during
charging needs a
double confirmation.