Rev 7 34 (EN)
• Step 1: Turn the main power switch on.
Press and together for 4 seconds to enter the Boot Mode.
• Step 2: Press key ; the screen will display a PUK number; this is your personal
unlocking code. Contact our service centre to get your new PIN.
6.9 FIRMWARE UPDATE
1. Via Bluetooth ► Refer to
App Wireless Connection Guide
.
2. Through USB memory stick
• Step 1: Download the robot’s latest software from www.mowox.com, such as
ROBOT.BIN onto a USB flash device.
(For example only)
(Please call the service, tell
them the PUK and get back
your PIN code)
1-Generate PUK
2-Update firmware
(wireless)
3-Update firmware
(U-disk)
4-Restart
1-Generate PUK
2-Update firmware
(wireless)
3-Update firmware
(U-disk)
4-Restart
To Next Page
Loading...
Need help?
General
