Rev 7 33 (EN)
• Step 1: Move the cursor to the icon , then hit the OK key .
• Step 2: Input the old PIN code through the keyboard, the factory setting is “1234”.
• Step 3: Input the new PIN code by tapping , , , […], and .
• Step 4: On the pop-up "Save it?", hit to save resp. to discard the changes and
return to the previous menu.
Please write down your new PIN here:
_ _ _ _
Every time you change the PIN, please write it down to remember. Without the correct PIN,
your robot is anti-theft protected and all functions are blocked.
6.8 PIN FORGOTTEN
Keep your purchase receipt and the robot’s serial number ready.
These are mandatory to obtain your PIN.
_ _ _ _
To Next Page
Loading...
Need help?
General
