Moxa Technologies MGate 5111 - Microsd Card; Power Requirements

MGate 5111 Getting Started
2-9
Weight:
589 g (1.30 lb)
Dimensions:
45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Storage Card Slot:
1 microSD (SDHC) card slot; supports up to 32 GB
Relay Alarm Circuit:
3-pin circuit with current carrying capacity of 2 A@ 30 VDC
Environmental Limits
Operating Temperature:
Standard Models:
0 to 60°C (32 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to 167°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Vibration:
IEC 60068-2-6, IEC 60068-2-64
Shock:
IEC 60068-2-27
Drop: IEC 60068-2-32
Power Requirements
Input Voltage:
12 to 48 VDC
Input Current:
416 mA max.
Power
Connector: Terminal block
Standards and Certifications
Safety:
EN 60950-1(LVD), UL 61010-2-201
Hazardous Location:
Class I Division 2, ATEX, IECEx
EMC:
EN 61000-6-2/6-4
EMI:
CISPR 22, FCC Part 15B Class A
EMS:
IEC 61000
-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000
-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000
-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000
-4-5 Surge: Power 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m
IEC 61000
-4-8 PFMF: 30 A/m
Reliability
Alarm Functions:
Relay, email, SNMP trap
Alert Tools:
Built-in buzzer
MTBF (mean time between failures)
Time:
718,131 hrs
Standard
: Telcordia SR332
Warranty
Warranty Period:
5 years
Details: See www.moxa.com/warranty
microSD Card
The MGate 5111 gateway series is equipped with a microSD card slot for easy configuration. The microSD card
can be used to store an MGate’s system configuration settings and the MGate’s system log. In addition, a
configuration stored on a microSD card can be uploaded automatically to an MGate.
NOTE
Inserting a microSD card into an MGate’s microSD slot results in one of two actions, depending on what kind of
data is currently stored on the card:
1.
If the microSD card contains a valid configuration file, the configuration wil
l be automatically copied to the
MGate.
2.
If the microSD card does not contain a valid configuration file (e.g., if it’s empty), the MGate’s configuration
will be copied to the microSD card.