Installing the Software
The following instructions explain how to install the Device Search Utility (DSU), a utility for configuring and
monitoring MGate 5111 units over a network.
1. Locate and run the following setup program to begin the installation process:
dsu_setup_[Version]_Build_[DateTime].exe
The latest version might be named dsu_setup_Ver2.0_Build_xxxxxxxx.exe, for example:
2. You will be greeted by the Welcome window. Click Next to continue.
3. When the Select Destination Location window appears, click Next to continue. You may change the
destination directory by clicking on Browse....
4. When the Select Additional Tasks window appears, click Next to continue. You may select Create a
desktop icon if you would like a shortcut to the DSU on your desktop.
To Next Page
Loading...
