Restart
All changes will be activated by clicking the Submit button first and then restarting the gateway. If a lot of
settings need to be changed, you can click Submit for each setting and then click Restart to activate all the
changes.
Logout
For safety reasons, remember to log out of the web utility to prevent people who do not have the proper
authorization from accessing the gateway.
MXview
The Moxa MXview network management software gives you a convenient graphical representation of your
Ethernet network and allows you to configure, monitor, and diagnose Moxa networking devices. MXview
provides an integrated management platform that can manage Moxa MGate series products as well as Ethernet
switches and wireless APs, and SNMP-enabled and ICMP-enabled devices installed on subnets. MXview includes
an integrated MIB complier that supports any third-party MIB. It also allows you to monitor third-party OIDs
and Traps. Network and Trap components that have been located by MXview can be managed via web browsers
from both local and remote sites—anytime, anywhere.
MXconfig
Moxa’s MXconfig is a comprehensive Windows-based utility that is used to install, configure, and maintain
multiple Moxa devices in industrial networks. This suite of useful tools helps users set the IP addresses of
multiple devices with one click, configure the redundant protocols and VLAN settings, modify multiple network
configurations of multiple Moxa devices, upload firmware to multiple devices, export/import configuration files,
copy configuration settings across devices, easily link to web and telnet consoles, and test device connectivity.
MXconfig gives device installers and control engineers a powerful and easy way to mass configure devices, and
effectively reduces the setup and maintenance cost.
For more detailed information regarding MXview and MXConfig, download the user’s manual from Moxa’s
website at http://www.moxa.com.
To Previous Page
Loading...
