System Log Settings
These settings enable the MGate firmware to record important events for future verification. The recorded
Information can only be displayed on the web console.
The available information that can be recorded includes the following events:
Event Group Description
System System Cold Start, System Warm Start
Network DHCP/BOOTP get IP/renew, NTP connect fail, IP conflict, Network link down
Configuration Login Fail, IP Changed, Password Changed, Firmware Upgrade, SSL Certificate
Import, Configuration Import/Export
PROFIBUS PROFIBUS communication logs
Modbus TCP Modbus TCP Communication logs
EtherNet/IP EtherNet/IP communication logs
PROFINET PROFINET communication logs
Local Log Settings Description
Enable log capacity warning (%) When the log amount exceeds the warning
percentage, it will trigger an event to SNMP Trap or
Email.
Warning by SN MP Trap
Email
Event log oversize action Overwrites the oldest event log
Stops recording event log
Syslog Settings Description
Syslog server IP IP address of a server which will record the log data.
To Next Page
Loading...
