MGate 5111 Web Console Configuration
Server Setting
Parameter Value Description
Server Name (an alphanumeric string)
You can enter a name to help you identify the unit, such as
the function, etc.
Server Location (an alphanumeric string)
You can enter a name to help you identify the unit location.
Such as “Cabinet A001.”
Time Settings
The MGate has a built-in Real-Time Clock for time calibration functions. Functions such as the log function can
add real-time information to the message.
-time users should select the time zone first. The console will
display the “real time” according to the time
zone relative to GMT. If you would like to modify the real
-time clock, select Local time
. MGate’s firmware will
modify the GMT time according to the Time Zone.
Parameter Value Description
Time Zone User’s selectable time zone This field shows the currently selected time zone and allows
you to select a different time zone.
Local Time User’s adjustable time. (1900/1/1-2037/12/31)
Time Server IP or Domain address
(e.g., 192.168.1.1 or
time.stdtime.gov.tw)
This optional field specifies your time server’s IP address or
domain name if a time server is used on your network. The
module supports SNTP (RFC-1769) for automatic time
calibration. The MGate will request time information from
the specified time server every 10 minutes.
ATTENTION
If the dispersion of the time server is higher than the client (MGate), the client will not accept NTP messages
from the time server. MGate's dispersion is 1 second. You must configure your time server with a dispersion
value lower than 1 sec for the NTP process to complete.
Network Settings
You can modify the IP Configuration, IP Address, Netmask, Gateway, and DNS.
To Next Page
Loading...
