Moxa Technologies MGate 5111 - Page 41

MGate 5111 Web Console Configuration
4-11
Slave Settings
Parameter Value Default Description
Slave ID 1 - 255 2 The Modbus slave ID that this slave module will accept.
6. EtherNet/IP Adapter Setting
The MGate 5111 supports Adapter mode for EtherNet/IP protocol.
Adapter Mode:
You can select Automatic for I/O data size configuration to automatically map OT (Originator to Target) and
TO (Target to Originator) data sizes.
7. PROFINET IO Device Setting
The MGate 5111 can play the role of the PROFINET IO device. All you have to set is the device name of the
MGate.