MPP Solar RS485 - 5. Code Reference (Only for 3 KW;4 KW;5 KW;10 KW;15 KW Models)

8
BMS RS-485 Card/Box Quick Guide
V.1.3
Active Function
This function is to activate lithium battery automatically while commissioning. After battery
wiring and commissioning is successfully, if battery is not detected and active function is
enabled in bundled software, the inverter will automatically activate battery if the inverter is
powered on.
5. Code Reference (Only for 3KW/4KW/5KW/10KW/15KW models)
Related information code will be displayed on LCD screen. Please check inverter LCD screen for
the operation.
Code
Description
Informs inverter to stop discharging battery.
Informs inverter to stop charging battery.
Informs inverter to charge battery.