To Next Page

To Previous Page

the phone bay. Gently replace the battery cover by

sliding it back into place.

Charging the battery

Plug the USB cable to the suitable socket in the device.

Subsequently, the microUSB plug of the microUSB

cable is plugged into the microUSB socket on your

phone and the charger is plugged into the power outlet.

You can also connect the microUSB plug of the

microUSB cable to the microUSB socket in the

charging base and place your phone in it so that the

connectors (17) in the phone come into contact with the

connectors in the base.

*Attention: Improper connection of the charger can

cause serious damage to the phone. Damages caused

by an improper use of the phone are not covered by the

warranty.

While charging, a static icon of battery state located in

upper right corner of the screen will become animated

. When the charging is complete unplug the charger

from the power outlet. Unplug the cable from the socket

on the phone.

Battery discharge indicator

When the battery gets discharged, a message of the

need to charge it will be displayed. Battery icon will be

empty . If the charge level is too low, the phone will

turn off automatically. To use the phone one has to

charge the battery.

mPTech Rumba 2 User Manual

Questions and Answers: