To Next Page

To Previous Page

SOS

The phone has a built-in SOS function, which allows

the user to initiate an emergency alarm and alert family

members or a physician in case of an accident. To use

this option, select [Menu] > [Settings] > [SOS]. There

you can activate the button located on the back of the

phone, enter the numbers to which the notification will

be sent [SOS Numbers], enable or edit the content of

the SMS notification [SOS Message]. When all options

are set and the button is activated, an audible alarm

sounds (if activated in the menu) and a text message

with the notification will be sent to the selected

numbers. Then the phone will three times try to call the

previously chosen numbers. You will switch the alarm

off again by pressing the <Back> button.

Speakerphone mode

During a call press [Speaker], to activate

speakerphone mode.

Speed dial

Choose [Menu] > [Phonebook] > [OK] > [Phonebook

settings] > [Speed dial]. You can set a [Status] of

this function, i. e. whether it is active or not. You can

assign contacts to buttons 2 to 9. To do this, select and

activate the option. When you enter [Set numbers] a

list will appear on the left side of the screen where the

digits which correspond with keypad buttons are

situated. Select an item, confirm it with <OK> and

select a contact from the list. When you set the

mPTech Rumba 2 User Manual

Questions and Answers: