© 2021 mPTech. All rights reserved. Rumba 2 EN
63
devices can be typed in here. Default name is
Rumba_2
• [Advanced] - here you will find options such as Audio
path, Storage (where files downloaded via Bluetooth
are stored), My address.
Pairing bluetooth devices.
To connect to a Bluetooth device choose it from a list
of available devices by entering [Menu] > [Settings] >
[Bluetooth] > [My device] and select [Search New
Device], and then search for the available devices.
Pressing <Cancel> will stop the search. After selecting
<Back>, you can select a device from the list and press
<Pair>. Both devices will display a request for
password compliance. Press [OK] to pair devices.
Sometimes a universal password is required: 0000
(four zeros) or 1234.
Sending files via Bluetooth.
To send files situated on the memory card to a paired
(connected) device enter: [Menu] > [Multmedia] >
[File manager] > [Memory card] or [Phone] and then
[Options] > [Open] and choose a file you wish to send,
from the phone memory. Then select [Options] >
[Send] > [Via Bluetooth] and search for the recipient's
device or add it from the list of paired devices. The file
will be send after recipient’ approval.
To Next Page
Loading...
Need help?
General
