4-5-7 Beep: Set the buzzer ON or OFF
SCREEN 1(4-5-7)
A : When entering the Beep option and is flashing(as SCREEN1).
B : When you press ◄ or ► KEY then enter the "ON" function and is flashing,
press ▲ or ▼ KEY then enter the "OFF" Function and is flashing
C : Press ◄ or ► KEY will return to Beep option and is flashing , press ▼ KEY
then go to the next option as SCREEN1(Beep→MD)
4-5-8 MD(Maximum Demand): Maximum demand metering settings
SCREEN 1(4-5-8)
A : When entering the MD option and is flashing(as SCREEN1).
B : When you press ◄ or ► KEY then enter the digital adjustment and
showed flashes, press ▲ or ▼ KEY can be adjusted.(1 MIN〜60 MIN)
Remark: Press ▲ or ▼ KEY> 2 SEC then the number will quickly change.
C : Press ◄ or ► KEY will return to MD option and is flashing , press ▼ KEY
then go to the next option as SCREEN1 (MD→AUTO POWER OFF)
4-5-9 AUTO POWER OFF : AUTO POWER OFF Function Setting
SCREEN 1(4-5-9)
A : When entering the AUTO POWER OFF option and is flashing(as SCREEN1) ,
while the AUTO POWER OFF Choose the instrument will start in 10 minutes
automatically shut down when you turn the dial switch and enter the boot
state measurements, when connected Adapter is automatically canceled
when AUTO POWER OFF function.
11
To Next Page
Loading...
