MRMC RT-14 - Triggers Connector

To Next Page

To Previous Page

RT-14 Quick Start Guide

Triggers connector

The Triggers connector is a (37-way D-type Female) used to connect any

trigger device with the RT-14 and its ribbon cables are 37-way D-type that

have the same pin assignments:

1. OUT1+ (Reserved: Camera start/stop control)

2. OUT2+ (Trigger 1 Out +)

3. OUT3+ (Trigger 2 Out +)

4. OUT4+ (Trigger 3 Out +)

5. OUT5+ (Trigger 4 Out +)

6. OUT6+ (Trigger 5 Out +)

7. OUT7+ (Trigger 6 Out +)

8. OUT8+ (Trigger 7 Out +)

9. OUT9+ (Trigger 8 Out +)

10. OUT10+ (Trigger 9 Out +)

11. OUT11+ (Trigger 10 Out +)

12. 0V

13. IN1+ (Reserved: Sync Input)

14. IN2+ (Trigger 1 In +)

15. IN3+ (Trigger 2 In +)

16. IN4+ (Trigger 3 In +)

17. IN5+ (Not used)

18. IN6+ (Not used)

19. +12V

20. OUT1– (Reserved: Camera start/stop control)

21. OUT2– (Trigger 1 Out –)

22. OUT3– (Trigger 2 Out –)

23. OUT4– (Trigger 3 Out –)

24. OUT5– (Trigger 4 Out –)

25. OUT6– (Trigger 5 Out –)

26. OUT7– (Trigger 6 Out –)

27. OUT8– (Trigger 7 Out –)

28. OUT9– (Trigger 8 Out –)

29. OUT10– (Trigger 9 Out –)

30. OUT 11– (Trigger 10 Out –)

31. 0V

32. IN1– (Reserved: Sync Input)

33. IN2– (Trigger 1 In –)

34. IN3– (Trigger 2 In –)

35. IN4– (Trigger 3 In –)

36. IN5– (Not used)