RT-14 Quick Start Guide
2
Keep away from pets and children. The head has powerful
motors that can pinch, so take care not to get your hands
trapped in the head or cabling.
Keep cables tidy. Use cable ties to keep them out of harm’s way.
If you have a head with slip rings then make use of them; avoid
running any cables between the base and the rotating head or
camera.
Location
Installation of this unit should be away from sources of excessive heat,
vibration, and dust.
Intellectual property
This product includes confidential and/or trade secret property.
Therefore, you may not copy, modify, adapt, translate, distribute, reverse
engineer, or decompile contents thereof.
Overview
Thank you for using the RT-14 from Mark Roberts Motion Control
(MRMC). The RT-14 is an Ethernet controlled interface unit between
Flair Motion Control Software and MRMC Motion Control and
Broadcast rigs.
To Next Page
Loading...
Need help?
General