ENGLISH
6 Pro-Source Man. cod. B411107FG MSC
TRANSPORT AND INSTALLATION
3Transport and installation
3.1.0 Packaging
Packaging includes a cardboard box with the following dimen-
sions:
3.1.1 Opening the package
IMPORTANT!
We recommend you to keep the packaging during the
warranty period.
Remove the machine from the packing materials following the in-
structions below:
1. Cut the seals of the closing adhesive and open the box con-
taining the key cutting machine.
2. Remove the packaging that contains the user manual, con-
sole (if any), cables and/or clamps/optional and accessories.
3. Remove the four side protections from the box.
4. Grab the two recesses on the long sides of the machine and
lift the machine out of the box.
5. Free the machine from its packing.
6. Extract the tool kit from the cardboard shaped packaging
placed at the bottom of the box.
3.2.0 Transport
The markings on the packing materials indicate how to handle
the machine during transport.
3.2.1 Unloading and handling the machine
The machine can be unloaded manually by 2 or 3 persons, or by
using a handling equipment (for example a lift truck).
Avoid dropping the machine, even a small damage
could impair its correct functioning.
3.3.0 Temporary storing
If the installation of the machine does not occur immediately,
store the machine in a dry and properly ventilated place.
3.3.1 Characteristics of the place of installation
The key cutting machine must be placed on a smooth level bench
about 90 - 110 cm (35 - 43 Inches) high, suitable for bearing the
weight of the machine and keep it horizontal, thus avoiding vibra-
tions and stress.
Allow a 30 cm (12 Inches) clearance around and above the key
cutting machine for correct functioning and maintenance.
3.3.2 Temperature and humidity
The tool should be used in rooms with a temperature range of 10
and 40 °C (50°F ÷ 104°F) and a relative humidity lower than about
60%.
3.3.3 Working environment
The machine must be used in a place protected from bad weather
(rain, hail, snow etc.).
Do not use the machine in explosive or partially explo-
sive atmospheres or in the presence of inflammable
liquids of gases.
Dimensions
Width 440 mm (17.3")
Height 500 mm (19.7")
Depth (Length) 540 mm (21.3")
Weight 25 Kg (55.12 lbs)
To Next Page
Loading...