MSC Pro-Source - Connections and Securing the Machine

ENGLISH
MSC Pro-Source Man. cod. B411107FG 7
TRANSPORT AND INSTALLATION
3.3.4 Lighting
In the place of installation lighting must be appropriate, in order
to allow the correct use and maintenance of the machine.
3.4.0 Connections
3.4.1 Grounding
The machine must be grounded through the centralized circuit of
the place of installation.
Warning:
Check that the power line voltage is compatible with
the machine voltage and that the line is grounded.
Use exclusively the power cord supplied with the
machine.
Do not touch the machine when your hands and/or feet
are wet or humid.
3.5.0 How to fasten the machine to your workbench
How to proceed:
• Remove the two screws (3) from the key cutting machine (1).
• Fasten the supplied bracket (2) with the screws (3).