Introduction
1-5
Quick Components Guide
Component Function Reference
DIMM1~2 Installing SDRAM modules See p. 2-4~2-5
Socket 462 Installing CPU See p. 2-2~2-3
C_FAN Connecting to CPUFAN See p. 2-13
S_FAN Connecting to SYSTEM FAN See p. 2-13
ATX Power Supply Installing power supply See p. 2-7
IDE1 & IDE2 Connecting to IDE hard disk drive See p.2-17
FDD Connecting to floppy disk drive See p.2-16
USB3 & USB4 Connecting to USB interfaces See p. 2-21
PCI Slot 1~3 Installing expansion cards See p. 2-28
AGP Slot Installing AGP cards See p. 2-28
CNR Slot Installing expansion cards See p. 2-28
JMDM1 Connecting to modem module See p. 2-20
JWOL1 Connecting to LAN card See p. 2-19
JBAT1 Clearing CMOS data See p. 2-26
JFP1 & JFP2 Connecting to case See p. 2-14
J8 & J10 Connecting to IR modules See p. 2-18
JAUD2 Connecting to audio connector See p. 2-23
J11 Connecting to chipset’s fan See p. 2-25
J6 Setting CPU FSB frequency See p. 2-27
To Next Page
Loading...
