Installing Drivers
4-7
Driver Installation for Windows
®
NT 4.0
Make sure you install Windows
®
NT 4.0 Service Pack 6 or the latest version
before installing the VIA drivers.
VIA Chipset Driver Installation:
Step 1: Insert the provided CD-ROM disk into the CD-ROM drive.
Step 2: Look for the CD-ROM drive, double click on the CD-ROM icon.
The setup screen will appear.
Step 3: Click on “VIA Chipset Drivers” icon and the screen will show “VIA
Service Pack 4.XX”.
Step 4: Click “Next” and the screen will show the “VIA Service Pack 1
README” dialog box.
Step 5: Click “Yes”. You can see “4in1 Setup Mode Option” with “Nor-
mally Install” and “Quickly Install”. If you choose “Quickly
Install”, the drivers will be installed automatically. Then go to step
9. If you choose “Normally Install”, go to step 6.
Step 6: Click “Yes” to proceed and then select “Install” to enable (Ultra)
DMA for IDE Driver.
Step 7: The “Choose Destination Location” dialog box appears. Click
“Next”.
Step 8: The “Select Program Folder” dialog box appears. Click “Next”.
Step 9: Please click on “Yes, I want to restart my computer” and then click
“Finish” to restart your computer and complete installation.
To Next Page
Loading...
