Chapter 3
3-20
Power Management Setup
The Power Management Setup allows you to configure you system to most
effectively save energy while operating in a manner consistent with your
own style of computer use.
ICPA Function Enabled
Power Management Press Enter
ACPI Sleep Type S1(POS)
PM Control by APM Yes
Video Off Option Suspend->Off
Video Off Method V/H SYNC+Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant-Off
State After Power Failure Off
CPU Fan In Suspend On
LED In Suspend Blink
Wake Up Events Press Enter
Item Help
Menu Level >
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Power Management Setup
ICPA Function
This item allows you to enable/eisable the Advanced Configuration and
Power Management (ACPI). Settings: Enabled/Disabled.
Power Management
This category allows you to select the type (or degree) of power saving and
is directly related to the following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
8
8
To Next Page
Loading...
