MSI MS-6340 - Page 37

Chapter 2
2-24
Pin Signal Description
11 AUD_MIC Front Panel Microphone input signal
12 AUD_GND Ground used by Analog Audio Circuits
13 AUD_FPOUT_R Right Channel Audio signal to Front Panel
14 AUD_RET_R Right Channel Audio signal Return from Front Panel
15 AUD_FPOUT_L Left Channel Audio signal to Front Panel
16 AUD_RET_L Left Channel Audio signal Return from Front Panel
17 AUD_GND Ground used by Analog Audio Circuits
18 NC No Connection
19 LINE-IN-R Line in Right
20 LINE-IN-L Line in Left
JAUD2 Pin Definition (11~20)
1
20
(Short)
- Enable Line-out connec-
tor on the back panel
- Disable MSI Front Panel
Audio Connector
2
19
10
9
14
13
16
15
Note: To have the Line-out connector on the back panel work
properly, you need to place the jumper on the pin# 13~16 of the
JAUD2 connector. Otherwise, this Line-out connector will not
function and nothing can be heard through speakers or headphones
attached to the connector. But MSI front panel audio connector is
enabled at this time and allows you to connect speakers or
headphones.
1
20
(Open)
- Disable Line-out connec-
tor on the back panel
- Enable MSI Front Panel
Audio Connector
2
19
10
9
14
13
16
15