C-9
USB PC to PC Networking Function
SPECIAL NOTICE for those users who have already installed
Network Adapter in their system:
If you’ve already configured your [IPX/SPX] and [Client for Netware
Networks] before installing GeneLink
TM
driver, we strongly recommend that
you should also install Software Router when you install GeneLink
TM
driver
into your system. If you decide not to install Software Router, then the OS
will not allow two IPX/SPX configurations co-exist in the same system. This
will cause GeneLink
TM
Driver Install Program overwrite your original IPX/
SPX configuration and make your original network configuration
malfunction.
To Next Page
Loading...
