16
Temposonics
®
ET Analog ATEX / IECEx / CEC / NEC / CCC Certified
Operation Manual
Manuals, Software & 3D Models available at:
www.mtssensors.com
Cables
Tefl on
®
cable
Part no. 530 112
Silicone cable
Part no. 530 113
Name of cable in order code: T Name of cable in order code: V
Material: Tefl on
®
jacket; black
Features: Twisted pair, shielded, fl exible,
high thermal resistance, mostly oil &
acid resistant
Cable Ø: 7.6 mm (0.3 in.)
Cross section: 4 × 2 × 0.25 mm²
Bending radius: 8 – 10 × D
(fi xed installation)
Operating temperature:
−100…+180 °C (−148…+356 °F)
Material: Silicone jacket; red
Features: Twisted pair, shielded, highly
fl exible, halogen free, high thermical
resistance
Cable Ø: 7.2 mm (0.28 in.)
Cross section: 3 × 2 × 0.25 mm²
Bending radius: 5 × D
(fi xed installation)
Operating temperature:
−50…+180 °C (−58…+356 °F)
Programming tools (Not approved for use in hazardous environments)
Hand programmer for analog output
Part no. 253 124
Programming kit
Part no. 254 555
Cabinet programmer for analog output
Part no. 253 408
Easy teach-in-setups of stroke length
and direction on desired zero / span
positions. For sensors with 1 magnet.
Kit includes:
1 × interface converter box
1 × power supply
1 × cable (60 cm) with M12 female
connector (5 pin), straight – D-sub
female connector (9 pin), straight
1 × cable (60 cm) with M16 female
connector (6 pin), straight – D-sub
female connector (9 pin), straight
1 × cable (60 cm) with 3 × terminal
clamp – D-sub female connector
(9 pin), straight
1 × USB cable
Software is available at:
www.mtssensors.com
Features snap-in mounting on
standard DIN rail (35 mm). This
programmer can be permanently
mounted in a control cabinet and
includes a program/run switch.
For sensors with 1 magnet.
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
4.8 Frequently ordered accessories for analog output – Additional options available in our Accessories Guide
551 444
To Next Page
Loading...
Need help?
General
