MTS Sensors Temposonics ET Series - Default Chapter; Table of Contents

2
Temposonics
®
ET Analog ATEX / IECEx / CEC / NEC / CCC Certified
Operation Manual
Table of contents
1. Introduction .....................................................................................................................................................3
1.1 Purpose and use of this manual ..................................................................................................................................................................3
1.2 Used symbols and warnings ........................................................................................................................................................................3
2. Safety instructions .............................................................................................................................................3
2.1 Intended use ................................................................................................................................................................................................ 3
2.2 Forseeable misuse ....................................................................................................................................................................................... 3
2.3 Installation, commissioning and operation .................................................................................................................................................. 4
2.4 Safety instructions for use in explosion-hazardous areas ............................................................................................................................5
2.5 Warranty ...................................................................................................................................................................................................... 5
2.6 Return ..........................................................................................................................................................................................................5
3. Identification ....................................................................................................................................................6
3.1 Order code Temposonics
®
ET ......................................................................................................................................................................6
3.2 Nameplate (example) ...................................................................................................................................................................................7
3.3 Approvals ....................................................................................................................................................................................................7
3.4 Scope of delivery ......................................................................................................................................................................................... 7
4. Product description and commissioning ....................................................................................................................7
4.1 Functionality and system design ..................................................................................................................................................................7
4.2 Styles and installation of Temposonics
®
ET (rod style) ................................................................................................................................8
4.3 Styles and installation of Temposonics
®
ET (profile style) ......................................................................................................................... 10
4.4 Magnet installation ....................................................................................................................................................................................11
4.5 Electrical connection ..................................................................................................................................................................................12
4.6 Frequently ordered accessories for ET-F/-W/-M/-S ...................................................................................................................................14
4.7 Frequently ordered accessories for ET-P ..................................................................................................................................................15
4.8 Frequently ordered accessories for analog output .................................................................................................................................... 16
5. Operation ...................................................................................................................................................... 17
5.1 Getting started ........................................................................................................................................................................................... 17
5.2 Programming and configuration ................................................................................................................................................................17
5.2.1 Analog hand programmer, part no. 253 124 ..................................................................................................................................... 17
5.2.2 Analog cabinet programmer, part no. 253 408 ................................................................................................................................. 19
5.2.3 Programming kit, part no. 254 555 ..................................................................................................................................................21
5.2.4 Setting examples for programming tools .........................................................................................................................................23
6. Maintenance and troubleshooting ......................................................................................................................... 24
6.1 Error conditions, troubleshooting .............................................................................................................................................................. 24
6.2 Maintenance ..............................................................................................................................................................................................24
6.3 Repair ........................................................................................................................................................................................................ 24
6.4 List of spare parts ......................................................................................................................................................................................24
6.5 Transport and storage ................................................................................................................................................................................ 24
7. Removal from service / dismantling ...................................................................................................................... 24
8. Technical data of Temposonics
®
ET ....................................................................................................................... 25
9. Appendix ....................................................................................................................................................... 27
10. Declaration of conformity ................................................................................................................................... 28