EasyManua.ls Logo

MTU 16V2000G65 - Page 64

MTU 16V2000G65
155 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fault
code no. Full designation Meaning Action
Setting parame-
ter no.
402 AL Open Load Digital
Input 3
Line disruption at digital in-
put 3, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006627
403 AL Open Load Digital
Input 4
Line disruption at digital in-
put 4, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006.628
404 AL Open Load Digital
Input 5
Line disruption at digital in-
put 5, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006.629
405 AL Open Load Digital
Input 6
Line disruption at digital in-
put 6, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006.630
406 AL Open Load Digital
Input 7
Line disruption at digital in-
put 7, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006.631
407 AL Open Load Digital
Input 8
Line disruption at digital in-
put 8, wiring faulty or no re-
sistance via switch, (alarm
configuration parameter, see
PR 2.8008.100 for explana-
tion).
Check wiring. 2.8006.632
408 AL Open Load Emerg.
Stop Input ESI
Line disruption at input for
emergency stop, wiring faulty
or no resistance via switch
Check wiring. 2.8006.633
410 LO U-PDU Injector voltage too low (limit
value 1, alarm configuration
parameter, see PR
2.8008.100 for explanation).
Execute engine gov-
ernor self-test, re-
place engine gover-
nor in case of fault.
2.0141.921
411 LOLO U-PDU Injector voltage too low (limit
value 2, alarm configuration
parameter, see PR
2.8008.100 for explanation).
Execute engine gov-
ernor self-test, re-
place engine gover-
nor in case of fault.
2.0141.922
412 HI U-PDU Injector voltage too high (lim-
it value 1, alarm configura-
tion parameter, see PR
2.8008.100 for explanation).
Execute engine gov-
ernor self-test, re-
place engine gover-
nor in case of fault.
2.0141.931
64 | Troubleshooting | MS15018/03E 2016-02
TIM-ID: 0000008508 - 003

Table of Contents

Related product manuals