MULTILIFT Ultima S Flex - Page 105

105
Ultima S / SL Flex & Pro
3/2019
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
114060421
>>>
NOTE! Remember to open the front locks before tipping or unloading
the container. If the front locks are closed for some reason when the
tipping device is in the upper position, codes d018 and/or d019 will
be shown on the control display. In this case, open the front locks
before lowering the tipping device in order to avoid damage to the
front locks.
Function Body locks are closed, Body locks and front
front locks are opened locks are opened
LED is slowly ashing LED is burning continuously
LEDs
2GCC
Display
and LEDs
2GRC
LEDs
2GMR
Function Open the front locks Close the front locks
LED comes on LED o󰀨
LEDs
2GCC
Display
and LEDs
2GRC
LEDs
2GMR
Button