MULTILIFT Ultima S Flex - ADDITIONAL EQUIPMENTS; Fast speed option

93
Ultima S / SL Flex & Pro
3/2019
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
114060421
!
!
!
!
ADDITIONAL EQUIPMENTS
Fast speed
WARNING!
You may only use the fast speed option for handling
empty or lightly loaded containers and controlling
the device movements without the container.
The value for the angle of middle frame that will stop the fast movement before the front
end of the container reaches the ground can be controlled by using a tilt sensor, which
is available as an accessory for the system. After this angle value has been exceeded,
unloading continues at the normal speed.
The fast speed option is integrated with the load holding valve, enabling an optimized oil
ow when driving the main cylinders outwards. The load holding valve maintains a controlled
movement along the entire length of the cylinder.
Unloading using
the fast speed
option
The fast speed option is the “third” speed setting of the hooklift in addition to the two standard
speeds. The fast speed option enables the controlled demounting of empty or lightly loaded
containers approximately one third quicker than the standard device.
WARNING!
Care must be taken at all times when operating the Fast Speed option. It is
recommended to release the ”rabbit” button before the container is completely
placed on the ground or before the main cylinders reach their end of stroke.