159
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
Slide pads in middle frame Slide pads in hook arm
Welding
Before welding, ensure the material to be welded, method and additives.
Contact Multilift service, if needed.
Welding may only be carried out by a trained welder.
Check from the truck user manual all the electrical connections which need to be
disconnected before welding. Remove the hooklift equipment electrical system connection
to the truck always before welding.
Connect the earthing cable as close as possible to the spot to be welded. If the welding
current ows through bearings, joints and seals, they might get damaged.
Check that the welding and ame cutting sparks do not y to oily areas. Remember also
the protection of the truck cab.
Use always welding protections. Ensure sucient ventilation. Prevent the risk of re.
To Next Page
Loading...