MULTILIFT Ultima S Flex - Safety facilities of the Ultima hooklift equipment

28
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
Safety facilities of the Ultima hooklift equipment
To increase safety, the control system has safety features to prevent incorrect movements
of the body so that the load can be kept under control.
The hydraulic cylinders are provided with load holding valves that ensure a controlled
movement of the Ultima equipment. In addition these valves serve as a safety feature in
case of the failure of hydraulic hoses.
The following functions have safety features:
• Hydraulic body locks cannot be opened during tipping.
• Hydraulic body locks cannot be closed during loading and unloading.
• If the body locks are closed, it is not possible to move the hook arm.
• Moving the hook arm is not possible during tipping.
• When tipping, the rear frame and the middle frame are locked together by
the tipping lock. The lock operates mechanically.
• Tipping action cannot be initiated if the hydraulic body locks are open.
• Main cylinders will not be able to move if the adjustable under-run bar is out
(does not concern the automatic under-run bar).
Hiab shall at all times have the right to:
• install, maintain and dismantle remote diagnostics tools or similar sensor-based
connectivity capabilities (“Connectivity”) in and from the Equipment; and
• access, send, receive, collect, store and use any and all information and data
gathered through the Connectivity, including but not limited to, information
concerning e󰀩ciency, availability, downtime, operation, operating environment,
movement, condition, logon, location and similar information relating to the
Equipment (the “Information”). Such Information may be used for optimizing
the Equipment, or any related equipment or services as well as for Hiab's internal
business and/or operating purposes. Hiab shall be responsible for complying
with applicable laws and regulations related to such Information.
Customer/user shall not in any way remove, disable, or interfere with the Connectivity or the
Information. Any intellectual property rights or other right and title in and to the Connectivity
features and the Information and all their further developments shall at all times be and remain
the exclusive property of Hiab.