MULTILIFT Ultima S Flex - Hydraulics service

149
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
!
Hydraulics service
Do not carry out any repair if you do not know the item to be repaired.
Never carry out any service or repair on system under pressure.
Stop the truck engine always before tightening or repairing hydraulic connections.
Do not try to locate a hydraulic hose leak with your hands. A leak from a pressurised system
can penetrate the skin and cause serious injuries. A leak from a pressurised system can
also cause a re when hitting a hot object.
Avoid skin contact with oil. Protect also your eyes.
Do not carry out work on hydraulic components under a raised frame. Use always a
mechanical support.
Do not remove any hydraulic components before supporting the frames and releasing
hydraulic system pressure.
Pipe connections, hose lengths and materials must conform with the Multilift requirements.
Use original Multilift spare parts or ensure otherwise that the components correspond with
the highest working pressure used.
Ensure that the oil corresponds with the requirements and ensure its viscosity and
cleanliness when adding oil into the system.
All changes to the recommendations concerning the oil and hydraulics must be veried
in writing with Multilift.
NOTE!
Servicing, repairs and installations of the hydraulic
components may be done only by persons trained for the jobs.