146
Ultima S / SL Flex & Pro
3/2019
114060421
Hooklift Multilift Ultima S / SL Flex & Pro
Service Manual
!
Hooklift supported to tipping position
If the work is done under the rear frame, the equipment must be lifted to tipping position
and the frames supported with separate tipping support in the correct places. Remember
to remove the support after the work has been completed.
NOTE!
Never move the middle frame or the rear frame by means of
hydraulics against the tipping support. The equipment cylinders
are powerful enough to break the support or the frames and there
is a great risk of personal injury. Stop the movement of the main
cylinders immediately when the frame reaches the support.
Stop the truck engine always when doing service work under the raised frame and under
the container.
Use ladders and working platforms when required.
Do not utilise the hooklift components for climbing up the equipment.
To Next Page
Loading...