87
Ultima S / SL Flex & Pro
3/2019
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
114060421
!
The correct operation of the safety lock must be checked
regularly and the shaft nipple greased every month.
• Open the safety lock of the gripping
hook by pressing button on the
control unit immediately before
lowering the front end of the container
to the ground.
• Stop the main cylinder when the
container reaches the ground.
• Check that the safety lock is still open.
If the safety lock has closed, it may
cause the safety lock or the gripping
bar to be damaged when the hook is
pressed down on the gripping bar.
• Continue the downward motion of the
main cylinders, with the safety lock
open, until the hook is released from
the gripping bar.
• Drive the vehicle forward, away from
the container.
See section 12 “unloading”.
To Next Page
Loading...