64 Part Number 9294844 April 6, 2023
Maintenance Section 4
Rinsing Sanitizer Prep
1. Install splash guard in the dispense area.
2. Press the Green Check to begin the plain water rinse cycle.
• The Rinse Timer screen will display, and count down
during the rinsing process then automatically proceed
to the Cleaning Solution Ice Production screen.
Ice Maker Cleaning Solution Ice
• Ice will then be produced using water from the
unit’s chilled water source to remove any remaining
cleaning solution from the ice maker.
n
Warning
This ice production will contain residual cleaning
chemicals and must be discarded.
Removal of Ice
1. Install ice removal chute in dispenser area.
2. Place empty bucket on floor under ice chute.
3. Press the Green Check to begin dispensing ice.
• The Ice Dispensing Timer screen will display, and the
machine will empty of ice.
Ice Disposal
1. Dispose of ice in the bucket and set aside.
2. Remove ice removal chute from the dispenser area and
set aside.
3. Press the Green Check to signify you have completed
the Zone 3 Monthly Cleaning. The screen will return to
the Main Menu screen.
Important
Ice storage has been depleted, low ice level may exist
for 30 minutes!
NOTE: If the descale option is left on in the Manger’s Menu
you will be prompted monthly to perform descale as part of
Zone 3 cleaning.
To Next Page
Loading...
