74 Part Number 9294844 April 6, 2023
Maintenance Section 4
Annual Planned Maintenance
The following parts are recommended for annual planned
maintenance replacement to ensure optimum unit
performance and minimize downtime:
• Refrigerator door gasket (cleaning may be sufficient)
• Two (2) #6 O-rings for the water and CO
2
/air quick
connect lines
• Nine (9) LMS valves
• (1 Or 2) Mixer assemblies
• Ice Dispense Wheel
• Blender Shaft Assemblies
The evaporator for the on board icemaker should be
inspected at least once a year. The evaporator service life
also depends on the water quality and environment. More
frequent inspection and maintenance are recommended to
keep performance of this icemaker optimized.
NOTE: All planned maintenance must be done by an
approved, certified technician.
To Next Page
Loading...
