MULTIQUIP WTB-16PD - Page 30

PAGE 30 — WTB-16PD TRACK-DRIVE POWER BUGGY • OPERATION MANUAL — REV. #0 (08/31/20)
OPERATION
TUB PIVOT
The hydraulic tub pivot can be controlled by either the hand
pivot control lever or the foot pivot pedal.
1. To rotate the tub to the left, push the lever
forward (Figure 22A) or press down on the pivot
pedal (Figure 22B).
2. To rotate the tub to the right, pull back on the lever
(Figure 22C) or push upwards on the pivot pedal
(Figure 22D).
Figure 22. Tub Pivot
PIVOT CONTROL
PEDAL
WTB16
PRESS DOWN
TO PIVOT
LEFT
WTB16
PULL
BACKWARDS
TO PIVOT
RIGHT
PIVOT CONTROL
LEVER
PIVOT CONTROL
LEVER
B
D
C
PIVOT CONTROL
LEVER
PUSH FORWARD
TO PIVOT
LEFT
PIVOT CONTROL
LEVER
PIVOT CONTROL
PEDAL
WTB16
WTB16
PULL UP
TO PIVOT
RIGHT
A
To order go to Discount-Equipment.com