Multitech MultiConnect Dragonfly MTQ-MNG6-B02 - Powering down Your Device; Device Reset (NRESET Pin 35)

To Next Page

To Previous Page

GETTING STARTED

MultiConnect

Dragonfly

MTQ-MNG6-B02 Device Guide 27

AT+CEDRXS

To set device functionality:

AT+CFUN

Note: See the AT commands reference guide for AT command details.

Powering Down Your Device

CAUTION: Failing to properly power down the device before removing power may corrupt your device's file

system.

To properly power down your device, do one of the following options:

Option 1: :

1. Issue the AT#SHDN command.

2. Wait 30 seconds.

3. Power off or disconnect power.

Option 2:

1. Hold the NRESET signal (pin 35) low for at least 1 second.

2. Disconnect power.

Device Reset (NRESET Pin 35)

Software:

Issue command AT#REBOOT to reboot the device and ATZ for soft reset.

Hardware:

Hold NRESET low for >50ms and <1s.